wowstick 1F+ Electric Screwdriver 64 In 1 Lithium Precision Screwdriver Rechargeable Repair Tool kits Cordless 56 Bits Screwdriver with LED Light And Magnetic Mat For Most Electronic Devices

Absolutely amazing little driver. The gears seem sturdy enough, plenty of strength for manual operation. Battery live is ok, definitely enough to get you through a job just don't forget to charge it back up immediately. My only complaint is that it doesn't hold on to the bits as strong as I would have liked. This is especially annoying when using hex bits that tend to get stuck in the screws easily. I think they should have used a much stronger magnet but it doesn't hinder the performance so I'm not going to dock any stars for that.Edit: So I've gone through all the bits, some of them are made of a slightly different metal which is why the driver doesn't hold on to them as good. The rest are held pretty tight. I can live with that.

When I got this pen drive screwdriver, I thought it would save my wrists the torture of repetitive tasks that working with micro screws would bring. And by and large it has, sort of. It hasn't really all that much torque, which I suppose is to be expected of it's diminutive size. When going for a screw that has been loosened a bit already it can remove it with ease, but something that has been torqued down and is solid will not be moved. You WILL Have to turn the screw a bit manually before you can engage the motor action and loosen it fully.Second minor gripe, for about 45 bucks and all the different accessories (which are just the same accessories with long and short variants) it isn't a bad deal. One point of major contention is the lack of magnet in the driver receptacle. Which I suppose they have tried to solve with an included magnetization block. Still yet, it is mildly annoying having to re-apply magnetic force to the bit to save screws that in some instances require tweezers to take them out of the board. It would be nice if they had put the small natural earth magnet in the base of the driver, but as it is the product is.. okay......Kind of hard to say the product is excellent, but nor is it awful. Torque could be better, bits could have natural magnet behind them, and the charge cable (maybe 1 inch long) could be longer to accommodate charging at a reasonable distance. Overall, for the price vs what you get from more expensive kits this is a reasonable investment. As it does technically not make my wrists sound like rice krispies as when I was doing all the torquing manually, I want to rate this product higher. But gripes above not withstanding I can't say this feels like a 100% quality product as I do get the feeling that the motor will burn out with every screw it takes up off the board, it hasn't yet!

I do a lot of my own guitar repairs, I own about 40 at the moment. I bought this to assist in removing the back of guitars among other things, my only gripe is that the position of the power switch is kind of awkward, it's very close to the tip and probably would be better off at the top or a little closer middle of the pen. Where it is now it's a little wearing on the wrist, especially for someone with arthritis like myself, otherwise i really like it. As other's have stated it could use a little more torque but it has removed the little i've used it for so far. However i did just get this today, I may leave an update later on after i've used it a bit more.

3 years since I first bought this electric screwdriver and it's definitely held up after many years of repairing phones, laptops, and consoles! The price is nothing compared to the value and quality of the set, if you need a great electric screwdriver I would definitely recommend this one!

So I have yet had it die on me yet and I have used it constantly off and on for around 5 hours only taking a break ever so often between use. There is a button that the front half is tighten and back half of the button is loosen. Unless the screws are firmly tightened. It will unscrew it with ease. Other than that you will have to twist it a little bit which is nice since it locks so it doesn’t spin unless you use the buttons.The amount of bits it comes with is decent since I take apart computers daily and some have safety screws that this set fortunately has bits for.

Got the screwdriver out of the box and charged it up for a few hours. My plan was to use it as a driver for R/C car repairs which I had some to do so I started taking screws out and I immediately noticed the screwdriver had next to no power. After 4-5 screws the bit stopped turning but the motor was still turning. It seems something stripped out inside of the driver. Every so often the bit would start spinning but the second you touched it to anything it would stop.Other thoughts: I thought the stand would also be the charger and was mistaken, it's just a stand. The charging cable it comes with is maybe 6 inches so make sure you have a longer micro USB cable. The LEDs are nice. The button is pretty easy to press on accident just while you're holding it. Wasn't expecting this thing to be super powerful, but it's very weak.

My reason for not giving it a full 5 stars is the case. I really don't understand the logic of providing a very nice case (that is held closed magnetically) that only holds 2 things. the driver and one tube, leaving out 2 tubes plus accessories or, a case that holds 2 tubes while you carry the drivers and still leaves behind 1 tube of tools plus accessories

This tool is excellent. It makes taking apart computers a cinch. Easy to use and enough bits for most needs. My only con is that the carrying case is not adequate. It only allows you to carry 1 set of bits and the tool itself. I wish they included a bigger carrying case so you can take all of your bits along.When unboxing be ready to unbox a lot of little boxes.