3D Printer Enclosure with LED Light, Fireproof Dustproof Tent Constant Temperature Protective Cover for Ender3 Max Neo/Ender3 S1 Plus/Ender 5/ Pro/Plus/Neptune 4 Plus/CR-10/10S PRO10 Mini/CR-X, Large

There's enough side to side and front to back clearance for base plate movement. It's taller than necessary but other than getting a custom made tent I don't see how you'd get around that. There's enough internal space that I can fit the Ebox filament drier inside while printing. The tent poles are fiberglass so they should stand up well over time. All in all, it seems like a really nice piece of kit for not too much money. I print in my basement and the tent seems to have cleared up my print base warpings by having a warmer draft free environment.

Fits Elegoo Neptune 4 Plus. Surprised Elegoo does not make a cover for this. This one fits perfectly, even if a tad bit tight. Small "sealed" holes in the back and sides for cords or exhaust vents. It only took about 10 minutes to setup.

This enclosure is slightly oversized for my Ender 5 Plus - in other words, it is the perfect size! It has room for my printer, and my filament heater. It is well worth the money!The instructions aren’t very clear, but if you know how to pitch a tent, you’ll do fine.1 issue: this enclosure is not square, so make sure to fully assemble it, and zip it shut to test the frame fit before you load your printer! I had to unplug everything, take my printer out of the enclosure, and reorient the position of the frame! You don’t have do that if you try to zip it shut first!

This was my first printer i've ever bought, and we wanted to have an enclosure due to dust and animals. The enclosure is massive, but not massive enough to put a elegoo Neptune max in. It fits perfectly for my elegoo Neptune plus in though. So maybe if you have a printer underneath any max brand it will work perfectly. It does hide the noise and it does keep cold air out. At first it was a pain to build, but after a while you get it. I got it when I was on sale so I got 2 of them. I would definitely recommend this, especially if you're just starting out printing. The quality is pretty good.It just reminds me of a tent. And it has side pockets and slots, if you have AMS or combo.

This enclosure is a very good value for the price with only a few drawbacks.First of all, it was shipped very quickly and arrived well packed (more on this later). The enclosure is made of fairly robust black outer material with a sliver reflective, foil-like interior. The zipper is neon orange, which is a nice styling offset.I did not encounter any poorly made seams or mistakes in manufacture; everything was robustly sewn and seams were fairly well aligned,The instructions are pretty basic and confused me for a second until I realized that every set of rods (A,B and C) required them to be joined with the plastic couplers. The instructions seemed to suggest to me only the A set was to be joined, but it turned out that ALL sets needed to be joined to come to the right dimensions.This is undoubtedly a design factor to keep the packaging very small; which is great and not so great. The ultra small package and severe folding pressure required to place the enclosure in the box caused scuffing and cracking in the clear plastic window; some areas almost breaking through the plastic. While this is an annoyance, it is not a deal breaker. I just wish it could have been folded somehow to preserve the clarity of the main window. For the price, I will live with the scarring, which somewhat cleared-up when I wiped it down with alcohol.Be prepared to stuff, (I mean really stuff!) the frame into the enclosure, but do it carefully! It is a tight fit but is required to keep it from sagging on the frame.The LED light bar is OK; not a lot of light but just enough.All in all, would I buy it again? Yes, most certainly. It fits my Sovol SV06 Plus quite nicely with some spare room left over, which makes for nice access to the printer. The main access flap is on the left; wish it was on the right where my touch screen is located, but you can position the front window zippers in a fashion that makes it easy to get in and not lose a lot of heat.All in all, it's a great enclosure for those on a budget!

Arrived fast, it was a snap to put together and it is big... has access for exhaust vent and another good size access for working on the printer. It has a clear plastic front for viewing your progress and its interior is lined in heat resistant fabric .. It zips up the front then on the top to the back for nice access to all areas of your printer. Cost is amazing fo the quality.

This tent works well maintaining a consistent temperature with heat from the hotend and bed. ABS prints come out perfect without bottom layer warping. The quality isn't bad for the price. I wish the zipper had a little more heft to it, but overall, this is a nice solution without having to spend big bucks for a enclosure. There's plenty of space for activities on the inside as well. The frame rods needed a little bit a painter's tape wrapped around the ends to fit snug into the joints. The entire front of the tent unzips for easy access inside. The LED light provides ok lighting inside the tent. I'd recommend this if you're trying to print Voron parts in ABS.

The media could not be loaded. Only came with 1 single LED and the dimensions were bigger than advertised which you would think is a good thing but ended up making the space I need not functional, setting up and instructions were not very clear, and didnt include humidity sensor. The velcro also won't stick on the side leaving gaps open, dissapointed for a new product and for the price may be better to look elsewhere