1080P 2Megapixel 1/2.7" Sony 323 CMOS Sensor Indoor Security Camera 3.6mm Lens with IR Cut, Indoor Dome Camera - 18PCS Infrared LEDs, Night Vision, 65ft IR Distance, Polycarbonate Dome Housing

Description

■ FEATURES● 1/3" Sony IMX323 CMOS Sensor + FH8536E● High Definition - 1080P - HD Quality ● Minimal Data Loss Long Reach "300M" Coaxial Cable● Advanced DNR (Digital Noise Reduction) function ● UTC (Up-To-Coaxial) function ● Included Smart ICR Mechanism ● 18IR LEDs● All in One Selection : AHD, TVI, CVBS, CVI ● Power Supply : DC12V±10%■ CAUTIONS● Do not install the camera in extreme temperature conditions. (operating temp. -10°C ~ +50°C) ● Do not install the camera under unstable lighting conditions. ● Do not touch the front lens of the camera.● Do not drop the camera and protect in from physical shocks.● Do not expose the camera to rain or spill beverage on it.● Never keep the camera pointed directly at strong light.● Do not expose the camera to radioactivity. ■ INSTALLATION 1. Make the screw hole and cable hole by the mounting template. 2. Fix the base housing to the desired place with screws supplied. 3. Power connect & Monitor impedance. Make sure which power supply that you selected before you use. - DC12V regulated power supply (DC12V camera only), Make sure "+", "-".Dual power supply (AC24V/DC12V both can be used)- To avoid fire or shock hazard, must use a UL listed power supply. - Set the monitor impedance switch to 75½. Check the impedance switch when the screen turns blurred.4. Moving the 3Axis bracket, and adjust desired scene by turning and moving the 3Axis bracket. Stop it when you think good direction. 5. Focus and OSD Adjust - Open the lens lever cover, and connect the power, and use the extra cable to adjust the focus and others function. After finished, please fix the lens lever cover carefully. 6. Fix the shroud - After everything checked finished, and fix the shroud and remove the film. It need match the base stop point and cover stop point.