SoftTouch 1 1/16" Round Adjustable Screw-in Leveling Furniture Glides for Wooden Furniture, Chrome (4 Pack)

I recently bought some chairs from Levity because I needed some that I could easily wash the fabric and just the fabric. Levity chairs did the trick but their adjustable "foot gliders" don't glide and were terrible on a rug. Maybe they work better on a wood or tile floor. Anyway, these are perfect. They fit into the existing holes in the base of the chair legs and screwed in very easily. They slide great on a rug floor. Solved my problem and didn't cost a lot of money.

I bought a dinette set from a local furniture store and they had screw-in leveler feet in the front. These feet were plastic with a small threaded shaft inside a larger threaded housing that was to be screwed into a metal thread insert in the wooden chair legs. The plastic wore out very quickly on our vinyl floors and made an awful squeak when sliding in and out from the table.I bought these steel feet and although the nylon inserts aren't threaded on the outside, I was able to drive them into the metal thread insert in the chair legs using a hammer. After seating them into the legs, turning the feet will raise or lower that leg giving me the ability to level the chair.

Works good for the money. Wish they made ones with a longer shaft giving more available height. The plastic inner thread is a little weak especially when adjusted all the way out.

I have a 19" equipment rack/cabinet for my home theater system. My turntable sits on top so it has to be level. Three of the cabinet's corners sit on a hardwood floor. The 4th corner is on a thick area rug. I have been stacking various feet and rubber caster guards under it, but every time I move the rack to access the wires, the assorted gizmos move and leveling it again is a pain.I finally got smart and bought these. They are perfect. The only obstacle I encountered while installing them was not having the 23/64 drill bit recommended for soft wood (my cabinet is MDF). Others said a 3/8 bit the instructions suggest for hardwood is too big for most applications. I used a 5/16 bit. That was too small for the sleeves, so I just wiggled the drill at the mouth of the hole to widen it slightly and then easily tapped the sleeves in. The fit is very snug, which I like. I had to use pliers to screw the foot on the carpet all the way in, but that was not hard.I am very happy with this product. I'm sure these feet can be used to level any number of things. Just don't make the holes too big. If you are in doubt, start with a a 15/16 or 23/64 bit. You can always go bigger if the initial holes are too small. As a carpenter once told me when I was young; "We have a lot of takin' off tools, but no puttin' back on tools." I embraced that axiom and it has served me well.

Exactly what I needed. Would recommend

Husband built a projector stand and used these to ensure stand would be balanced and steady. They worked perfectly. We ordered more.

Installation was easy and followed the directions to get a perfect fit and it looks excellent and classy.I used these for a computer monitor stand on the desk, I'll come and update this review if there is any problem in the future.

The threaded plastic insert has an outer diameter of approx 0.350". There are ribs running along that will friction fit the insert into soft materials such as wood. The insert also has a flange that has a 0.500" diameter and is about 0.077" thick. The length of the insert minus the flange is exactly 0.500", though it wouldn't hurt to drill deeper as the screw needs space to travel into (I'd say about 1.25"). The metal feet have a diameter of approx 1.00".Feels durable and the threads are fairly smooth. Only note is that the bottom of the feet is smooth metal and don't provide much grip.

Buen producto por el costo, los adquirí para nivelar un mueble de baño y evitar que estuviera en contacto con el piso directamente y menguar la humedad.Sugiero que cuando los coloquen lo hagan con toda calma ya que en madera blanda pudiera ser suficiente con el uso de la broca de 3/16 ya que por al ser la madera blanda el agujero queda un poco mayor y avocardando un poco más queda bien para la pieza plástica que contendrá la rosca de la pata.

I bought these for a dining room table I built. They are very simple to use. I just marked out where I wanted the feet, drilled a pilot hole, and then drilled the hole specified on the package. They give you two different sizes, depending on the wood hardness you are working with. The insert felt very secure when I put it in the hole (it kind of works like a drywall anchor), and I put some epoxy on it for good measure. The feet just screw into the inserts. Super easy!

Me gustaron pero la compra está limitada a un kit, lo ideal es que dejaran comprar más piezas para más muebles.

We broke a couple of these off the bottom of our filing cabinet when we moved and needed replacement. These require a slightly bigger hole than the originals in my application, but that worked to my advantage since the holes were slightly damaged anyway so I had to drill them a bit bigger. I would recommend these - easy to install.

Cumple con su función