Hardware Resources 9975BLK Hardware Resources 9975 3/4 Inch Overlay Adjustable Wrap Cabinet Door Hinge with 270 Opening Angle - Single Hinge

The hinge is 3/4" offset (good). The "depth" of the actual hinge is VERY deep, it is for a much thicker door panel. If you have a door panel that is anything less than an 3/4 or inch thick the hinge will look weird.

I needed them for armoire doors that got damaged during our move. Was a little disappointed that they did not come with screws.

O or - stars would be more appropriate. These are the worst hinges I think I have ever dealt with. 1st they do not have enough holes throughout to properly secure to the door. 2nd. the metal used is thin and soft. This allows the door to bend the hinge and sag. I used 4 hinges on a 25 inch tall door. before I could get it all on and adjusted the hinge had already started to bend and allow the door to sag. This is not a heavy door..3/4 inch rail and stiles with 1/4 plywood filler. I tried drilling extra holes to put more screws in to better hold to the cabinet and the door, but it was no use, the metal is just weak and I doubt I would ever be able to get them to support the door. If I had not modified them they would already be on their way back.

I used these for a stereo component cabinet. These are pretty basic hinges. They don't come with screws. They are very thinly painted. One of the two hinges I ordered arrived with some very light scratches that you could only see if you looked hard. There is no spring mechanism that holds the door in its closed position, but the hinges are stiff enough that the door stayed in whatever position it was put in. The biggest problem I found is that they only allow the door to be adjusted in 2 of the 3 axes. With a door that swings 270 degs, alignment is critical so that it looks good open and closed. If your door and cabinet are perfectly square, you may not need adjustment in all 3 axes.

Fit