Anti Vibration Pads for Washing Machine - 4 Pads with Tank Tread Grip + Level - Washer Dryer Pedestals Fits All Machines - Noise Dampening, Protects Laundry Room Floor - Washing Machine Support

These anti-vibration pads should fit the bill for anyone that needs to quiet down a wobbly appliance. However in my case, as you can see in the pic, I use these to eliminate vibration in my telescope tripod to make Astro photography easier.The size is perfect and doesn’t get in the way of anything, the heavy, hockey-puck sort of rubber (not as hard as a hockey puck but VERY strong and stable) does a great job of supporting heavy equipment, and I detected zero vibration the whole time.A simple rinse with hot water gets them clean quick, and if you ask me, they’re worth every penny.

Does exactly what we were looking for; our small washer would vibrate wildly on spin cycle. This absorbs the shaking; the machine still moves, but these pads stop the vibrations from shaking the entire apartment.

The media could not be loaded. So, I had been chasing this really bad vibration issue with a new washer that we purchased. It's a bit unique as the washer is upstairs and sits in a rubber pan on a wood/vinyl floor (vs concrete). I had done some research on balancing/leveling the washer and had gotten it as good as I could with the base system, but it was still noisy and vibrating the whole house for certain loads.Note: If you are having a problem in this area, one important tip that I came across that didn't dawn on me was to shake the washer from corner-to-corner. Even if it is level, if it still moves pretty freely, you're going to get vibration noise and movement. I had to lift and level a few times as the rubber pan mine sits in has ribs that the pedestal sits on, so had to lift it high enough so that it didn't sit on those. And the pedestal height is probably a contributing factor, but we are not getting rid of the pedestal! ;)Although the supports did not completely alleviate the vibration and noise, they did significantly decrease the vibration and noise. Enough that I thought there were well worth the purchase price and enough that I would say they removed almost 90 to 95% of the problem. The increased footprint was clearly a big help and they lifted a bit higher than the feet adjustments that I had previously made so they were clearing the ribs on the rubber pan.Before installing these, I reset the pedestal feet back to 0 height. For me, well worth the purchase.The pictures are of the feet installed. The video (you can only upload one!) is after they were installed and I'm washing clothes and a large Judo Gi (many times the culprit).Installation Notes: Due to the location of my washer I used a yoga ball and air compressor to lift the washer and place the feet. Good thing I have long arms. I have included a couple of photos of those as well.

Prevents the machines from walking. Perfect if you have them on a tile floor to reduce vibrations, which can also help to reduce the total noise made.

Kind of a pain to lift the machine to install but well worth it. I’m in an RV and the lack of vibration is awesome! Air wedge bags was a lifesaver for installing.

Did not work for me or my washer. I have a speed queen and it did not allow the legs to level properly.

Very well. Thank you.

Thick, heavy pads prevent the machine from shaking itself out of place. Works well.